Targeting Pod (TGP)
(Redirected from Targeting Pod)
Jump to navigation
Jump to search
The targeting pod is a controllable camera available for all playable aircraft. It is a crucial part in target acquisition and fire control for air-to-ground weapons, such as the GBU-12 or the AGM-65.
- AV-42C: Built-in targeting pod.
- F/A-26B: Optional AN/AAQ-28 targeting pod available.
- F-45A: Built-in targeting pod. Known as the Electro-Optical Targeting System (EOTS).
- AH-94: Built-in targeting pod. Known as the Targeting Acquisition and Designation Sight (TADS).
- T-55: Optional AN/AAQ-28 targeting pod available.
- EF-24G: Optional AN/AAQ-34 targeting pod available.
TGP MFD Functions
- WPT: Slews the TGP to the current waypoint.
- SOI : Sets the TGP as the sensor of interest for control with the flight stick's thumb controls.
- MARK: Toggles an IR laser that can only be seen through NVG's at night. It can be a helpful tool for target identification in Multiplayer.
- Zoom (+/-): Increases or decreases the zoom.
- GPS-S: Uses the location of the ground or target at the cross-hair to create a GPS point on the GPS page.
- GPS-A: Slews the TGP to the currently-highlighted GPS point.
- PWR: Toggles TGP power on/off.
- HMD: Toggles the projected image of the HEAD mode on/off.
- HEAD: Allows the TGP to be controlled through your fighter's Head-Mounted Cueing System (HMCS) functionality. The image is projected onto the visor when it is down. There are additional control mappings available in this mode:
- Zoom is mapped to the controller's directional up and down controls.
- Center press saves the center location or target to tracking, and exits HEAD mode.
- FWD: Centers the TGP forward parallel to the aircraft's nose as indicated on the "W" in the HUD.
- LIM: Toggles the camera movement limit and position marking. Camera movement limit is represented by a white outline, and the camera position relative to the aircraft is represented as a white dot.
- SENS: Cycles the sensor mode.
- DAY: Low temperature white-hot thermal sensor.
- NIGHT: White hot sensor with high gain for low light conditions.
- COLOR: Visible light spectrum sensor.
- MODE: Cycles between PIP and TGT modes. Only Indicates FWD and HEAD modes.
- FWD: Indicates the TGP is locked in the Forward position. This is the TGP's default mode, and it will switch to TGT as soon as the TGP is moved.
- TGT: Indicates the TGP is locked onto a target or stabilized onto a point on the ground.
- PIP: Indicates the TGP's crosshairs are centered on the current weapon's predicted impact point.
- HEAD: Indicates the TGP is set to the HEAD track mode.
- Laser Code: Displays the currently set laser code for the targeting pod. Can be set by clicking on it and inputting a number between 0001 and 9999 on the UFC.
The aircraft roll orientation is indicated in the bottom left corner of the TGP/EOTS screen.